Product DescriptionOptical Fiber Protective Sleeve/Tube We Also Called it as “FTTH Drop Splice Closure”, “FTTH Drop Repair Splice Closure ”, “FTTH Drop Repair joint kits”This Fiber Drop Splice Closure is used in FTTH Connection.
We use this Fiber Drop Repair Splice Closure to make heat Shrinkable Splice with 2pcs Drop Cable (Or Drop Cable SC Connector Terminated one side). Designed for either Flat Drop Cable or Round Drop Cable. this Fiber Drop Repair Splice Closure is installed indoor or Outdoor, provide good connection and protection in FTTH Constructions.
Features:
1.Continue operating Temperature:-45°C~125°C;
2.Shrink Temperature :Start at 70°C;full recovery at 125°C;
3.Inner layer glue melt temperature:70°C~100°C;
4.Shrinking ratio:2:1,3:1, 4:1
5.Waterproof , RoHS compliant, outer layer Flame-retardant.
6.Standard color: Transparent (Other color available upon request.)
7. Stock type: 1.5mm 60mm 100pcs/bag type
Specifications:
Diameter: 60mm
Outer Diameter: 2.5mm
Application of Heat Shrink Tube: The heat shrink tube is for insulation and protection of components, terminals, wiring connectors and wiring strapping, marking and identification mechanical protection.
Optic Fiber heat shrink tube parameters: Shrinking Temperature (°C)110 ~ 130
Radial Shrinking Rate (%)>50Axial Shrinking Rate (%)<10
Low Temperature Property
No crackle at -55°C lasting 4 hours
Normal Operation Temperature (°C)-55°C ~ + 135°C
Normal Operature Relative Humidity≤95%
Spark- over Strength (kV/mm)≥20Tensile Strength (Mpa)
20Loss at -40°C0.03dBLoss at +60°C RH95%0.02dB
